Bucket Mount Kit

1. Park the machine on a level surface.

2. Disengage the blade-control switch.

3. Engage the parking brake.

4. Move the motion-control levers outward to the NEUTRAL-LOCK position.

5. Shut off the engine and remove the key.

Close section

Parts needed for this procedure:

Bucket retainer	1
Bracket	1
Plate	1
Carriage bolt (5/16 x 7/8 inch)	1
Handle knob	1
Flange-head bolt (5/16 x 3/4 inch)	2
Flange nut (5/16 inch)	2
Locking pin	1

1. Secure the bracket to the engine guard using 2 flange-head bolts (5/16 x 3/4 inch) and 2 flange nuts (5/16 inch) as shown in Figure 1.

   

   Figure 1

   1. Flange-head bolt (5/16 x 3/4 inch)
   2. Bracket
   3. Flange nut (5/16 inch)
   4. Engine guard

2. Secure the plate to the bracket using the locking pin (Figure 2).

   

   Figure 2

   1. Locking pin
   2. Plate

3. Secure the bucket retainer to the engine guard using the carriage bolt (5/16 x 7/8 inch) and handle knob (Figure 3).

   

   Figure 3

   1. Handle knob
   2. Bucket retainer
   3. Carriage bolt (5/16 x 7/8 inch)

Close section