Parts needed for this procedure:
| Left cleated wheel assembly | 1 |
| Right cleated wheel assembly | 1 |
Remove the outer packaging from the machine.
Raise and support the machine securely.
Remove the wheel nuts, brackets, and straps securing the machine to the crate.
Remove the crate.
Install the cleated wheels onto the machine with the wheel nuts, flat side out.
Lower the machine to the ground and torque the wheel nuts to 122 to 129 Nm (90 to 95 ft-lb).
Check the operation of the machine, and adjust the parking brake; refer to the Operator's Manual.
Ensure that the tire pressure is 1 bar (14.5 psi).