Shoulder Bolt Replacement Kit

1. Park the machine on a level surface.

2. Engage the parking brake.

3. Shut off the engine and remove the key.

Parts needed for this procedure:

Shoulder bolt (1/2 x 1-1/8 inches)	1
Locknut (1/2 inch)	1
Flat washer (1/2 inch)	3

1. Remove the existing shoulder bolt and locknut from the bracket and deck (Figure 1).

   

   Figure 1

   1. Bracket
   2. Existing shoulder bolt
   3. Deck
   4. Existing locknut

2. Secure the bracket to the deck using the new shoulder bolt (1/2 x 1-1/8 inches), locknut (1/2 inch), and 3 flat washers (1/2 inch) as shown in Figure 2.

   

   Figure 2

   1. Bracket
   2. Shoulder bolt (1/2 x 1-1/8 inches)
   3. Deck
   4. Flat washers (1/2 inch)
   5. Locknut (1/2 inch)