Park the machine on a level surface and engage the parking brake.
Shut off the engine and remove the key.
Allow the engine to cool before installing this kit.
Replace the filter every 200 hours or more often in dirty or dusty conditions (Figure 1).
Parts needed for this procedure:
Decal | 1 |
Parts needed for this procedure:
Carburetor kit | 1 |
Intake manifold | 1 |
Linkage clip | 1 |
Parts needed for this procedure:
Filter base | 1 |
Bolt | 1 |
Nut | 1 |
Strap | 2 |
Clevis pin | 2 |
Cotter pin | 2 |
Hose | 1 |
Hose clamp (small) | 1 |
Hose clamp (large) | 1 |
Rain cap | 1 |
Hose clamp (large) | 1 |