Installation

Preparing the Machine

  1. Park the machine on a level surface.

  2. Engage the parking brake.

  3. Lower the cutting unit.

  4. Shut off the engine and remove the key.

Installing the Sign

Parts needed for this procedure:

Slow-moving vehicle sign1
Sign mount1
Bottom mount2
Flat washer5
Flange-head bolt (1/4 x 3/4 inch)7
Locknut (1/4 inch)7
  1. Remove 4 plastic rivets from the hood as shown in Figure 1.

    g307903
  2. Align the sign mount to the hood in the same location as plastic rivets removed in step 1 (Figure 2).

  3. Install the sign mount using 4 flange-head bolts (1/4 x 3/4 inch) on top of the hood, and 2 bottom mounts and 4 locknuts (1/4 inch) on the bottom of the hood (Figure 2).

    g307919
  4. Install the slow-moving vehicle sign as shown in Figure 3.

    g307963