Weight Kit

1. Park the machine on a level surface.

2. Disengage the PTO, engage the parking brake.

3. Shut off the engine, remove the key, and wait for all moving parts to stop before leaving the operating position.

Parts needed for this procedure:

Install a weight over both frame tubes as close to the front caster hub as possible (Figure 1).

Note: For 122 cm (48 inch) and 137 cm (54 inch) machines, install the mounting hardware through the tie-down hole.

Figure 1

1. Bolt (2)
2. Washer (2)
3. Weight
4. Bracket
5. Nut (2)
6. Tie-down for 122 cm (48 inch) and 137 cm (54 inch) machines
7. Caster hub