Weight Kit

1. Park the machine on a level surface.

2. Engage the parking brake.

3. Lower the cutting unit.

4. Shut off the engine and remove the key.

Parts needed for this procedure:

1. Use 4 hex-head bolts to secure the weight bracket to the bumper (Figure 1).

   

   Figure 1

   1. Nut
   2. Weight
   3. Weight bracket
   4. Carriage bolt
   5. Hex-head bolt

2. Use 2 carriage bolts and 2 nuts to secure the weights to the weight bracket (Figure 1).

Note: Certain traction-unit and attachment combinations require you to install a third weight. Refer to your traction-unit Operator’s Manual for more information.