60V Pole Saw Harness

Important: If you are operating pole saw Model 51870/T with battery pack Model 88640, 88660, or 88675, you must install this harness for proper support and balance.

Connect the metal hook on the shoulder harness to the strap collar on the pole saw handle (Figure 1).

Figure 1

1. Strap adjuster
2. Metal strap hook
3. Strap collar
4. Shoulder strap

The strap length is adjustable; slide the strap adjuster up to decrease the length of the strap, or down to increase the length of the strap (Figure 1).

If there is ever an emergency and you need to rapidly remove the harness, disconnect the quick-release buckle as follows:

1. Press in on the sides of the buckle (A of Figure 2).

2. Allow the buckle to disconnect (B of Figure 2).

Figure 2