USB Kit

Z Master® 2000 Series Riding Mower

Model No. 145-8458-Serial No. and Up

Installation

Preparing the Machine

  1. Park the machine on a level surface.

  2. Disengage the blade-control switch.

  3. Move the motion-control levers outward to the NEUTRAL-LOCK position.

  4. Engage the parking brake.

  5. Shut off the engine and remove the key.

Installing the Kit

  1. Remove the plug on the control panel.

    g379887

    Figure 1

  2. Connect the USB port to the wire harness adapter and install the assembly.

    g379885

    Figure 2

  3. Locate the USB wire connector on the main wire harness. Cut the cable tie securing the USB harness to the machine.

    g379886

    Figure 3

  4. Connect the USB wire harness connector to the adapter.

    g379884

    Figure 4