Important: You need to have the mid-mount attachment and box blade attachment holder kit (08861) prior to installing this kit.
Warning
CALIFORNIA
Proposition 65 Warning
Use of this product may cause exposure to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Safety
Safety and Instructional Decals
 |
Safety decals and instructions are easily visible and are located near areas of potential danger. Replace every damaged or missing decal. |
Installation
Preparing the Machine
-
Park the machine on a level surface or move the machine to a machine lift.
-
Engage the parking brake.
-
Raise the mid-mount attachment. Insert the depth control pin into the position to keep the mid-mount attachment up.
-
Shut off the engine and remove the key.
-
Wait for all moving parts to stop and machine components to cool.
-
Chock the wheels or raise the machine with a machine lift.
Installing the Profile Blades
Parts needed for this procedure:
| Profile blade | 3 |
| Hitch pin with hairpin cotter | 6 |
-
Insert the profile blades into the box blade attachment holder bracket sleeves (Figure 1).
Note: Install the profile blades with the blades facing the attachment holder.
-
Secure each blade with a hitch pin and a hairpin cotter (Figure 1).
