2in Receiver Draw Bar

1. Park the machine on a level surface.

2. Engage the parking brake or shift the transmission lever to the P (PARK) position.

3. Shut off the machine and remove the key.

Parts needed for this procedure:

1. Insert the hitch ball mount into the receiver located at the back of the machine (Figure 1).

2. Insert the hitch pin through the hole in the receiver and the hitch ball mount. Secure with the hairpin cotter (Figure 1).

Figure 1

1. Hairpin cotter
2. Receiver
3. Hitch ball mount
4. Hitch pin

Refer to the Operator's Manual for the machine for towing information.