Side Mirrors Kit

1. Park the machine on a level surface.

2. Engage the parking brake.

3. Shut off the machine and remove the key.

Parts needed for this procedure:

Note: You can install the mirrors in the upper or lower set of canopy holes. Figure 1 shows an upper installation.

Figure 1

1. Secure the mirror mount to the canopy tube using 2 flange-head bolts (M6 x 40 mm) and 2 locknuts (6 mm) as shown in Figure 2 or Figure 3.

   

   Figure 2

   Lower, left installation shown

   

   Figure 3

   Lower, right installation shown

2. Secure the mirror to the mount using 2 hex-socket head bolts and 2 locknuts (6 mm) as shown in Figure 4 or Figure 5.

   

   Figure 4

   Lower, left installation shown

   

   Figure 5

   Lower, right installation shown