Headlight Kit

1. Park the machine on a level surface.

2. Shut off the machine and remove the electric-start key.

3. Wait for all moving parts to stop.

4. Remove the battery packs.

Parts needed for this procedure:

1. Remove the 4 plastic screws that secure the top cover to the mount bracket. Remove the top cover.

   

   Figure 1

2. Secure the new headlight to the top cover with the 4 plastic screws.

   

   Figure 2

3. Route the wire harness to the bottom of the power head and attach the harness to the connector.

   

   Figure 3

4. Install the 3 cable ties around the headlight harness and the handle as shown below.

   

   Figure 4

   1. Cable tie that goes through the hole in the handle