Park the machine on a level surface.
Engage the parking brake.
Lower the cutting units.
Shut off the machine and remove the key.
Disconnect the main-power connectors; refer to your machine Operator’s Manual.
Parts needed for this procedure:
| Fuse (80 A) | 2 |
| Fuse (150 A)—Model 04580 only | 1 |
| Fuse (175 A)—Model 04590 or 04591 only | 1 |
| Fuse (5 A) | 1 |
| Fuse (10 A) | 5 |
| Fuse (30 A) | 1 |
| Fuse (35 A) | 3 |
| Fuse (100 A)—Model 04580 only | 1 |
| Fuse (3 A)—Model 04590 or 04591 only | 1 |
Install a fuse to the appropriate location on your machine; refer to your machine Operator’s Manual or the Service Manual on www.Toro.com.