This edger is intended to be used by residential homeowners
to trim grass around the edge of driveways, sidewalks, and more as
needed outdoors. It is to be used only by adults. It is designed to
be used in combination with the Flex-Force™ 60V MAX Attachment-Capable Power Head Model 51810T. Using this product
for purposes other than its intended use could prove dangerous to
you and bystanders.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and product damage.
You are responsible for operating the product properly and safely.
Visit www.Toro.com for product safety and operation training
materials, accessory information, help finding a dealer, or to register
your product.
Whenever you need service, genuine the manufacturer parts, or
additional information, contact an Authorized Service Dealer or the
manufacturer Customer Service and have the model and serial numbers
of your product ready. Figure 1 identifies the location of the model and serial numbers
on the product. Write the numbers in the space provided.
Important: With your mobile device, you can scan the QR code on the serial
number decal (if equipped) to access warranty, parts, and other product
information.
Safety-Alert Symbol
The safety-alert symbol (Figure 2) shown in this manual and
on the machine identifies important safety messages that you must
follow to prevent accidents.
The safety-alert symbol appears above information that alerts
you to unsafe actions or situations and is followed by the word DANGER, WARNING, or CAUTION.
DANGER indicates an imminently hazardous
situation which, if not avoided, will result
in death or serious injury.
WARNING indicates a potentially hazardous
situation which, if not avoided, could result
in death or serious injury.
CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
This manual uses two other words to highlight information. Important calls attention to special mechanical information
and Note emphasizes general information worthy
of special attention.
The Model 51810T Power Head is compatible with a variety of
Toro-approved attachments that, when combined, comply with specific
standards; see the following table for more detail.
| Combination | Power Head Model | Attachment Model | Standard |
| String Trimmer | 51810T | 88716 | Conforms to UL STD 82Certified to CSA STD C22.2
No. 147 |
| Edger | 51810T | 88710 | Conforms to UL STD 82Certified to CSA STD C22.2
No. 147 |
| Pole Saw | 51810T | 88714 | Conforms to UL STD 82Certified to CSA STD C22.2
No. 147 |
| Cultivator | 51810T | 88715 | Conforms to UL STD 82Certified to CSA STD C22.2
No. 147 |
| Hedge Trimmer | 51810T | 88713 | Conforms to UL STD 62841-4-2Certified to CSA
STD C22.2 62841-4-2 |
 |
For assistance, please see www.Toro.com/support
for instructional resources or contact your Authorized Service Dealer
before returning this product.
|
Warning
CALIFORNIA
Proposition 65 Warning
Use of this product may cause exposure to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Contact your local municipality
or your authorized Authorized Service Dealer or distributor for more
information on how to responsibly recycle the battery.
