GeoLink™ Precision Spray System

Using the Standard Mode

Getting Started

Switching to Standard Mode

Creating a Password

Creating and Using Boundaries

Creating a New Field or Course

Creating a New Boundary

Naming and Categorizing a Boundary

Removing a Boundary

Creating and Using a Boundary Inside a Boundary

Using the Pause Feature while Creating a Boundary

Creating a Boundary from Spraying

Using and Setting Up the Rate Control

Opening the Sprayer Controller

Creating a Product, Volume Rates 1 and 2, and Changing Volumes

Changing the Rate

Changing the Agitation Pressure (Changing Preset Agitation)

Selecting a Spray Nozzle

Entering the Flowcal from the Meter

Calibrating the Sprayer

Note: Ensure the sprayer is calibrated before the first job.

Setting up a Catch Test and Clearing a Job (Old Flow Calibration)

Calibrating the Compass

Spraying with the Display

Changing the Pressure Manually for the Hose Reel and the Eductor

Spraying Manually

Creating a Job and Setting Up Spray Areas

Finishing a Previous Job

Exporting a Job

Understanding the GeoLink System (Tips/Tricks)

Understanding the Overlap Percentages

Setting the Auto Section Control and Boundary Limit

GeoLink^™ Precision Spray System

Model No. 41623—Serial No. 315000001 and Up

Model No. 41624

Model No. 41625

Using the Standard Mode

Getting Started

Switching to Standard Mode

Creating a Password

Creating and Using Boundaries

Creating a New Field or Course

Creating a New Boundary

Naming and Categorizing a Boundary

Removing a Boundary

Creating and Using a Boundary Inside a Boundary

Using the Pause Feature while Creating a Boundary

Creating a Boundary from Spraying

Using and Setting Up the Rate Control

Opening the Sprayer Controller

Creating a Product, Volume Rates 1 and 2, and Changing Volumes

Changing the Rate

Changing the Agitation Pressure (Changing Preset Agitation)

Selecting a Spray Nozzle

Entering the Flowcal from the Meter

Calibrating the Sprayer

Setting up a Catch Test and Clearing a Job (Old Flow Calibration)

Calibrating the Compass

Spraying with the Display

Changing the Pressure Manually for the Hose Reel and the Eductor

Spraying Manually

Creating a Job and Setting Up Spray Areas

Finishing a Previous Job

Exporting a Job

Understanding the GeoLink System (Tips/Tricks)

Understanding the Overlap Percentages

Setting the Auto Section Control and Boundary Limit